Associate Professor HSU Fu-Yuan
Professor
HSU Fu-Yuan, William Associate Professor & Chair of department
Curricum Vitae
Profession: Metal, Metal Processing, Processing Modelling, Computational Fluid Dynamics, Casting, Metallurgy, Aluminium alloy casting.
Office Tel No.：037-382243
Email：willyhsu@nuu.edu.tw
Facsimile：037-382247
Education：The University of Birmingham, U.K., Ph.D in Metallurgy and Materials) (Overseas Research Scholarship, ORS, UK )
Education
1999~2003 Ph.D in Metallurgy and Materials (ORS scholarship ), School of Metallurgy and Materials, The University of Birmingham, England, U.K.
1995~1996 MSc with Distinction in Materials Technology, Department of Mechanical, Manufacturing & Software Engineering, Napier University, Scotland, U.K.
1987~1992 Five years diploma in Material Engineering, National Taipei University of Technology (former National Taipei Institute of Technology)
Work experience
2014~2016, China Metal Internaltonal Holdings Inc. (CMW TianJin, CMB SuZhou), Casting Technique Consultant for ducutile iron castings, such as automotive parts and componets, on DISA molding system.
2014~2016, O-TA Precision Industry Co., LTD., R&D depart., Casting Technique Consultant for stainless steel and de-wax castings, such as golf club and iron, sports componets, plumbing and pipes.
2011~2013, Taiwan Control Valve Corporation, R&D depart., Casting Technique Consultant for corrisves resisatnce aluminium casting valve (300 kg) for petrochemical industry. The aluminium casting reserch, granted by Minsistry of Economic Affairs, SBIR project, “using diffuser runner design to imporve alumimum casting valves” .
2011~2016, Boost Logic, USA. (www.boostlogic.com), Casting Developmet on 2000HP Aluminum Intake manifold casting for Nissan GTR racing car.
2003~2016, BMF Co., Ltd. (http://www.bmf.com.tw), Casting Technique Consultant for developing larg sacle aluminium castings (more than 300kg), such as valves, frames, and pipes.
2004~2006, National United University in Taiwan – Glass and Optical Materials Research Center, Post Doctor Research on The modelling on Overflow Fusion Process for TFT-LCD Flat Glass.
2003~2004, Chung Chou Institute of Technology- Mechanical Engineering Program, Department of Intelligent Automation Engineering, Lecturer on Metal Heat Treatment, Electrical Discharge Machining (EDM), 3D Printing Theory, etc, for lecturing credit of 9 points.
2003~2004, Dayeh Hevy Industry Inc., Aluminum Casting Developing for Prototype Aluminium Engine Head Casting.
1999~2003, Birmingham University, England, UK, PhD research on: further development runner system for aluminum gravity casting. Applying commercial CFD modeling package Flow3D®. Experience on Real time X-ray radiography experiment.
1996~1999, LioHo machine works Ltd. Co., Technical Engineer in R&D department: introducing 3D CAD software package, introducing CAE modelling package (AFS solid), Casting developing on aluminium wheel and automotive parts, and Introducing surface coating using vacuum Sputtering facility.
1995~1996, Napier University, Scotland, UK, MSc research on: the MMC composite material,silicon carbide particle reinforced 6061 aluminium alloy.
1992~1994, Corporal of Military Police, Administration in battalion
Curriculum:
Metal, Engineering Graphics, 3D Computer Aid for Design (CAD), Metal Casting, Computer Aid for Engineering(CAE), Metal Processing Modelling, Metal heat treatment, Powder Metallurgy, Metallurgy, Steel Metallurgy, Material Processing Lab.
Awards:
2020 Ru-Siang Huang, Fu-Yuan Hsu, Taiwan Foundry Paper Award, Taiwan Foundry Society.
2013 Po-Sen Chen, Fu-Yuan Hsu, Huey-Jiuan Lin, Chung-Yung Wu, Taiwan Foundry Paper Award, Taiwan Foundry Society.
2012 Zong-Ching Lin, Jhewn-Kuang Chen, Fu-Yuan Hsu, Shih-Fan Chen, Taiwan Foundry Paper Award, Taiwan Foundry Society.
2010 Fu-Yuan Hsu, Huey-Jiuan Lin, Taiwan Foundry Paper Award, Taiwan Foundry Society.
2011 Fu-Yuan Hsu, National United Univerity (Taiwan), the year of distinguished lecturer.
2010 Fu-Yuan Hsu, National United Univerity (Taiwan), the year of distinguished lecturer.
2006 J. F. Hu., Chung Yi Shih, Fu-Yuan Hsu, Taiwan Foundry Paper Award, Taiwan Foundry Society.
Research
1. 2021 The study of computational modeling on Hot-Spot analysis for iron (steel) casts without feeders, Key technology development plan for total digital transition of the mold industry chain(2/4), Ministry of Economic Affairs, sub-project director.
2. 2020 The study of Campbellology rules on the feeder/runner system design for sand mold of iron casting, Key technology development plan for total digital transition of the mold industry chain(1/4), Ministry of Economic Affairs, sub-project director.
3. 2014 The Study of the Infiltration Ability of High Speed Resin Micro-Droplets Impinging on the Porous Layer of Sand Particles, National Science Council, (NSC), project director.
4. 2008 The Research of Runner System for Aluminium Alloy Gravity Casting--The Design of a Diffuser, National Science Council, (NSC), project director.
5. 2009 The Research of Runner System for Aluminium Alloy Gravity Casting--The Design of a Diffuser, National Science Council, (NSC), project director.
Journal paper
1. Chi-Ming Hung, Yu-Lin Feng, Fu-Yuan Hsu, Expert System for Sand Mold Casting Design,Journal of the Mechatronic Industry, Issue. 453, pp30-34. (2020/12/01)
2. Chang-Yuang Liu, Fu-Yuan Hsu, The Strength of the Inorganic Binder, Sodium Silicate, Sand by Heating and Drying, Journal of Taiwan Foundry Society, Vol.46, No.3, 2020,09,01, p33-44
3. Zheng-Yan Lin, Fu-Yuan Hsu, Modeling and Validating the Blind-feeder Designs of Ductile Iron Casting, Journal of Taiwan Foundry Society, Vol.46, No.2, 2020/06/01, P35-50
4. Ru-Siang Huang, Fu-Yuan Hsu, Modeling and Validating the Deposition Phenomena of Oxide Inclusions of Recycled Aluminum in Holding Furnace, Journal of Taiwan Foundry Society, Vol.46, No.1, 2020/03/01, P25-40. (noted: the manuscript awarded the 2020 Taiwan Foundry Paper Award.)
5. Yu-Hung Chen, Fu-Yuan Hsu, The Validation of solidification shrinkage models for Ductile Iron Casting, Journal of Taiwan Foundry Society,Vol.45, No.3, 2019/09/01, P25-38.
6.Li-min Lai, Fu-Yuan Hsu, The Needle-typed printhead design Applied for 3D Printing Sand Mold Using Inorganic Sodium Silicate Resin, Journal of Taiwan Foundry Society,Vol.43, No.1, 2017/03/01, P7-20.
7.Fu-Yuan Hsu, Kuo-Nien Wang and Cheng-Lung Li, Bifilm defects in Ductile-Iron Support Bracket Castings, International Journal of Cast Metals Research, Volume 30, Issue 3, Pages 148-158, 2017
8.Fu-Yuan Hsu, BIFILM DEFECT FORMATION IN HYDRAULIC JUMP OF LIQUID ALUMINUM., Metallurgical and Materials Transactions B, June 2016, Volume 47, Issue 3, pp 1634-1648, 2016
9. Jau-Kwei Huang, Fu-Yuan Hsu, The Study of Penetration Behavior of Continuous Injection Resin Droplets in the Silica Sand Bed, Journal of Taiwan Foundry Society,Vol.42, No.2, 2016/06/01, P29-36.
10.Fu-Yuan Hsu and Cheng-Lung Li, Runner systems containing ceramic foam filters quantified by “area normalized” Bifilm index map, International Journal of Metalcasting, September 2015, Volume 9, Issue 3, pp 23-35 2015.
11.Fu-Yuan Hsu, Po-Sen Chen, Huey-Jiuan Lin, Chung-Yung Wu, Boiling Phenomena Of Cooling Water In The Permanent Mold, International Journal of Metalcasting, volume 9, Issue 2, pp 31-40 · JUNE 2015
12. Jau-Kwei Huang, Fu-Yuan Hsu, The Study of the Infiltration Ability of Resin Droplets Impinging on the Porous Layer of Sand Bed, Journal of Taiwan Foundry Society,Vol.41, No.3, 2015/09/01, P18-26.
13. Jhih-Song Chen, Fu-Yuan Hsu, The Sand Core Blowing of Simulation and Verification, Journal of Taiwan Foundry Society, Vol.41, No.1, 2015/03/01, P17-26
14.Jhih-Song Chen, Fu-Yuan Hsu, The Sand Core Blowing in L Shaped Geometry Cavity, Journal of Taiwan Foundry Society, Vol.41, NO.1, 2015/03/01, P1-6.
15.Cheng-Lung Li, Fu-Yuan Hsu, The Development of Bifilm Defect as Molten Aluminum Alloy Flowing Through The Ceramic Foam Filter, Journal of Taiwan Foundry Society, Vol.40, No.4, 2014/12/01, P9-24.
16.Fu-Yuan Hsu, Cheng-Lung Li, and John Campbell, ceramic foam filters in runner system design For Gravity Castings, Key Engineering Materials, Vol. 573 (2014) pp 19-29.
17.Huey-Jiuan Lin, Fu-Yuan Hsu, Chun-Yu Chiu, Chien-Kuo Liu, Ruey-Yi Lee, simulation of glass molding process for planar type SOFC sealing devices, Key Engineering Materials, Vol. 573 (2014) pp131-136.
18.Cheng-Lung Li, Fu-Yuan Hsu, Application of Ceramic Foam Filter in Aluminum Gravity Casting, Journal of Taiwan Foundry Society, Vol.39, No.3, 2013/09/1, P39-48.
19.Shiuh-Wen Chang, Huey-Jiuan Lin, Fu-Yuan Hsu, Chung-Yung Wu, Effect of Crucible Design on Flow Pattern of Nozzle Exit during Planar Flow Casting, Journal of Taiwan Foundry Society, Vol.39, No.1, 2013/03/01, P1-8.
20.Po-Sen Chen, Fu-Yuan Hsu, Huey-Jiuan Lin, Chung-Yung Wu, Boiling Phenomena of Cooling Water within D-shaped Cooling Channel in the Permanent Mold, Journal of Taiwan Foundry Society, Vol.38, No.4, 2012/12/01, P19-31. (noted: the manuscript awarded the 2013 Taiwan Foundry Paper Award.)
21.Zong-Ching Lin, Jhewn-Kuang Chen, Fu-Yuan Hsu, Shih-Fan Chen, Simulation of Ductile Iron Exhaust Manifold Castings, Journal of Taiwan Foundry Society, Vol.38, No.3, 2012/09/01, P21-29.(noted: the manuscript awarded the 2013 Taiwan Foundry Paper Award.)
22.Fu-Yuan Hsu and Yao-Ming Yang, CONFLUENCE WELD IN AN ALUMINUM GRAVITY CASTING, Journal of Materials Processing Technology 212 (April 2012) 825– 840.
23.Fu-Yuan Hsu, Huey-Jiuan Lin, Foam filters used in gravity casting, Metallurgical and Materials Transactions B: Volume 42, Issue 6 (2011), Page 1110-1117.
24.Fu-Yuan Hsu, Huey-Jiuan Lin, A diffusing runner for gravity casting, Metallurgical and Materials Transactions B, Volume 40, Issue 6 (2009), Page 833-842.
25.Hsu, F.-Y., Mark R. Jolly and John Campbell, A multiple-gate runner system for gravity casting, Journal of Materials Processing Technology, 209, (2009), pp 5736-5750.
26.Fu-Yuan Hsu, Huey-Jiuan Lin, A Diffuser Design for Aluminum Alloy Gravity Casting, Journal of Taiwan Foundry Society, Volume 35, Issue 4 (2009), pp.1-10..(noted: the manuscript awarded the 2010 Taiwan Foundry Paper Award.)
27.Huey-Jiuan Lin, Fu-Yuan Hsu, Wei-Kuo Chang,” Effect of Isopipe Temperature on the Glass Sheet Forming for Overflow Fusion Process by Numerical Simulation”, Advanced Materials Research,Vol.39-40, p517-522, 2008/05
28.Huey-Jiuan Lin, Fu-Yuan Hsu, Wei-Kuo Chang,” Design of Trough for Overflow Fusion Process by Numerical Simulation”, Glass Technology: European Journal of Glass Science and Technology Part A, 2007/8/1. Impact factor: 0.398 (2007)
29.Gebelin, J.C.; Jolly, M.R.; Hsu, F.Y., ““Designing-In” Controlled Filling Using Numerical Simulation for Gravity Sand Casting of Aluminium Alloys”, International Journal of Cast Metals Research, Volume 19, Number 1, January 2006, pp. 18-25(8)
30.Hsu, F.Y.; Jolly, M.R.; Campbell, J., “Vortex-Gate Design for Gravity Casting”, International Journal of Cast Metals Research, Volume 19, Number 1, January 2006, pp. 38-44(7)
31.Huey-Jiuan Lin, Fu-Yuan Hsu and Wei-Kuo Chang, “Design of Trough for Overflow Fusion Process by Numerical Simulation”, European Journal of Glass Science and Technology Part A: Glass Technology, Vol.48, No.2, p.73-77.
32.Ming-Hsun Wu, Fu-Yuan Hsu, I-Shou Chan, Simulation and Analyses of the Microgear Pumps, Journal of Chung Chou, Vol.26, (2007/12/01), P65-71.
Conference Paper
1.Fu-Yuan Hsu ,Campbellology for Runner System Design, Shape Casting: 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday, pp 187-199, 11 Mar 2019, TMS 2019 annual meeting, San Antonio, Texas.
2.Fu-Yuan Hsu and Yu-Hung Chen, The Validation of Feeder Modeling for Ductile Iron Castings, Shape Casting: 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday, pp 227-238, 11 Mar 2019, TMS 2019 annual meeting, San Antonio, Texas.
3.Fu-Yuan Hsu , Kuo-Nien Wang and Cheng-Lung Li, The Reliability of Ductile Casting Iron Dependent on Runner System Design: An Example of Support Bracket of Brake Caliper , Shape Casting: 6th International Symposium TMS (The Minerals, Metals & Materials Society), ANNUAL MEETING & EXHIBITION February 14 – 18, 2016 • Nashville, Tennessee
4.Fu-Yuan Hsu, Shin-Wei Wang and Huey-Jiuan Lin, “The External and Internal shrinkages in Aluminum Gravity Castings”, Shape Casting: 5th International Symposium TMS (The Minerals, Metals & Materials Society), San Diego, CA, USA, February 16-20 (2014)
5.Fu-Yuan Hsu, Hydraulic jump in Aluminum Gravity Castings, The 12th Asian Foundry Congress, Taipei, Taiwan, Dec. 8-11 (2013)
6.Sheng-Li Changa, Kuo-Chi Chiu, Fu-Yuan Hsu, Jhewn-Kuang Chenc, "Design of a novel pump for bio-applications", SPIE Photonics Europe (EPE): Proc. SPIE 8428 (Micro-Optics), 16 - 20 April 2012, Brussels, Belgium, 84281F (8 May 2012); http://dx.doi.org/10.1117/12.921756
7.Fu-Yuan Hsu, Huey-Jiuan Lin, FOAM FILTERS USED IN GRAVITY CASTING, Shape Casting 4th: Light Metals Division Symposium in Honor of Prof. John T. Berry, TMS (The Minerals, Metals & Materials Society) Annual Meeting, San Diego, CA, USA, Feb. 27 –March 3, (2011), pp45-52.
8.Fu-Yuan Hsu and Yao-Ming Yang, CONFLUENCE WELD DEFECT IN ENGINE HOUSING CASTING , Light Weight Materials for Vehicles and Components, Materials Science & Technology 2010, Houston, Texas, USA, October 17-21, (2010)
9.Fu-Yuan Hsu, Huey-Jiuan Lin, “A diffusing runner for gravity casting”, Shape Casting 3rd International Symposium, TMS (The Minerals, Metals & Materials Society) Annual Meeting, San Francisco , California, USA, Feb. 16-18, (2009)
10.Fu-Yuan Hsu, Mark R. Jolly and John Campbell, “The Design of L-Shaped Runners For Gravity Casting”, Shape Casting 2nd International Symposium, Procedings of 2007 TMS (The Minerals, Metals & Materials Society) Annual Meeting, Orlando, Florida, USA, Feb.25-Mar. 1st, (2007), pp 101-108,
11.Jean-Christophe Gebelin, Mark R. Jolly and Fu-Yuan Hsu, “Designing-in” controlled filling using numerical simulation for gravity sand casting of aluminum alloys”, Shape Casting 1st: The John Campbell Symposium, Proceedings of 2005 TMS (The Minerals, Metals & Materials Society) Annual Meeting, San Francisco , California, USA, Feb.13-17, (2005)
12.F.-Y. Hsu, M.R. Jolly, and J. Campbell, “Vortex-Gate Design for Gravity Casting”, Shape Casting 1st: The John Campbell Symposium, Proceedings of 2005 TMS (The Minerals, Metals & Materials Society) Annual Meeting, San Francisco , California, USA, Feb.13-17, (2005), pp.73-82
13.Zhang-Yuan-Luo, Fu-Yuan Hsu, Curved diverging runner design applied to sand mold gravity casting, The 2020 Annual meeting of Taiwan Foundry Society, National Taipei University of Technology, Taipei Tech, 2020/11/28
14.Ru-Siang Huang and Fu-Yuan Hsu, The Study of Deposition of Oxide Inclusions in Secondary Aluminum Alloy Liquid in Holding Settling Tank, The 2019 Annual meeting of Taiwan Foundry Society, Nan Shan Education & Training Centre, Taichung, Taiwan, 2019/11/15
15.Zheng-Yan Lin 1and Fu-Yuan Hsu, The design of side feeder of ductile iron applied for the ingate of bottom-gated filling, The 2019 Annual meeting of Taiwan Foundry Society, Nan Shan Education & Training Centre, Taichung, Taiwan, 2019/11/15
16.Zhang-Yuan-Luo and Fu-Yuan Hsu, Curved diffuser design applied to sand mold gravity casting, The 2019 Annual meeting of Taiwan Foundry Society, Nan Shan Education & Training Centre, Taichung, Taiwan,2019/11/15
17.Yu-Hung Chen and Fu-Yuan Hsu, The Validation on solidification shrinkage models for Ductile Iron Casting, The 2018 Annual meeting of Taiwan Foundry Society, , Southern Taiwan University of Science and Technology, 2018/11/17
18.陳宇宏, 許富淵, 球墨鑄件兩隔離熱點形狀與最佳冒口設計關係之研究,台灣鑄造學會106年度論文發表會, 臺灣科技大學－國際大樓, 台北市大安區基隆路四段43 號, 2017/12/9
19.賴立民 許富淵, 3D 列印水玻璃砂模應 用之噴頭設計, 台灣鑄造學會105年度論文發表會, 彰化建國科技大學－圖文 大樓(彰化縣彰化市介壽北路 1 號), 2016/11/20
20.陳宇宏 許富淵, 冒口尺寸量化應用於球墨鑄鐵, 台灣鑄造學會105年度論文發表會, 彰化建國科技大學－圖文 大樓(彰化縣彰化市介壽北路 1 號), 2016/11/20
21.劉承勳、許富淵, 水玻璃無機樹脂砂模加熱乾燥硬化性質之研究, 台灣鑄造學會104年度論文發表會, 高雄展覽館3樓會議室, 2015/12/02
22.黃詔奎、許富淵, 連續噴射樹脂液滴在矽砂床滲透行為研究, 台灣鑄造學會104年度論文發表會, 高雄展覽館3樓會議室, 2015/12/02
23.許富淵, “金屬永久模具中冷卻管內冷卻水的沸騰現象”,第七屆海峽兩岸工程材料研討會,論壇D, 雲林國立虎尾科技大學2012/11/23
24.許富淵, “陶瓷泡沫濾網應用於鑄造流道方案設計”,第七屆海峽兩岸工程材料研討會,論壇D,雲林國立虎尾科技大學2012/11/23
25.李正隆、許富淵，“陶瓷泡沫濾網應用於鋁合金重力鑄造”，台灣鑄造學會101年度論文發表會,逢甲大學人言大樓B1 第五國際會議廳 2012/11/18